The L-&-R boat latch has been granted an International Patent. Persons or Organizations who are found to be in breach of this patent will be prosecuted to the full extent of the International patent laws. © Copyright Release & Retrieve Boat Latch Pty Ltd, 2006 and "L-&-R" is a Trademark of Release & Retrieve Boat Latch Pty Ltd
How to Launch   -   How to Retrieve   -   Winch   -   Read Reviews   -   Dealers & Fitters   -  Purchase Product   -   Contact Us
Towing eye Snare where roller doesn’t reach out far enough.
Example - Here is an example showing an Aluminium boat more commonly used on Towing Eye (Aluminium) boats. In the first case ‘All is well’ ….. In the second  the roller does not reach out far enough to stop the boat. Here the more vertical post (with the same winch platform) allows the roller to sit up against the bow with the latch not too far forward. The solution is the Roller Extender allows a ‘quick fix’ without cutting, boring or welding.
Adjustment - Horizontal Adjustment 48 mm max. (4 hole positions) Vertical up/down 40 mm roller support arms Rear hole 121 mm (4”) Front hole 24 mm (1”) 50 mm roller support arms Rear Hole 104 mm (4.8”) Front hole 28 mm (1.1)
An Aluminium boat is shown (more likely than F/G boat) but the principle is the same
More Detail More Detail More Detail More Detail Launch & Retrieve Boat Latch X0 Boat Fibreglass  U-Bolt Snare Trailer X=80   150 + Angle  to horizontal  approx. 150 Roller Extender
option
Roller Extender parts highlighted in green
65 0
85 0
Covers Fibreglass, wood, poly, steel & jet ski
More Detail More Detail
How to Launch   -   How to Retrieve   -   Winch   -   Read Reviews   -   Dealers & Fitters   -  Purchase Product   -   Contact Us
Launch & Retrieve Boat Latch Aust.  0402 079 660Int.+61 402 079 660            Geoff Davis
Covers Fibreglass, wood, poly, steel & jet ski
HOME
View this in ‘LANDSCAPE’ MODE on your PHONE
U-Bolt Boat
Install Section
Email Email BUY BUY SiteMenu
Towing eye Snare where roller doesn’t reach out far enough.
Example - Here is an example showing an Aluminium boat more commonly used on Towing Eye (Aluminium) boats. In the first case ‘All is well’ ….. In the second  the roller does not reach out far enough to stop the boat. Here the more vertical post (with the same winch platform) allows the roller to sit up against the bow with the latch not too far forward. The solution is the Roller Extender allows a ‘quick fix’ without cutting, boring or welding.
Adjustment - Horizontal Adjustment 48 mm max. (4 hole positions) Vertical up/down 40 mm roller support arms Rear hole 121 mm (4”) Front hole 24 mm (1”) 50 mm roller support arms Rear Hole 104 mm (4.8”) Front hole 28 mm (1.1)
An Aluminium boat is shown (more likely than F/G boat) but the principle is the same.
More Detail More Detail More Detail X0 Boat Fibreglass  U-Bolt Snare Trailer X=80   150 + Angle  to horizontal  approx. 150 Roller Extender
option
Roller Extender parts highlighted in green
65 0
85 0
Note:- Installation & Use of the L & R Products The products need to be installed, and used, in accordance with the printed in2structions on the packaging, printed inserts and the information published on the website www.boatlatch.com. Release & Retrieve takes no responsibility for product that is not installed and used within these guidelines.
More Detail More Detail
The L-&-R boat latch has been granted an International Patent. Persons or Organizations who are found to be in breach of this patent will be prosecuted to the full extent of the International patent laws. © Copyright Release & Retrieve Boat Latch Pty Ltd, 2006 and "L-&-R" is a Trademark of Release & Retrieve Boat Latch Pty Ltd
Slideshow  Summary Slideshow  Summary Component     Detail Component     Detail Before You     Install Before You     Install Installation Installation Option Kits Option Kits Install FAQ Install FAQ Maint. and Spares Maint. and Spares
U-Bolt Boat
Install Section
Aust.  0402 079 660Int.+61 402 079 660            Geoff Davis